Changes between Version 1 and Version 2 of TracNotification

Timestamp:

2009/12/27 07:22:19 (15 years ago)

Author:

trac

Comment:

--

TracNotification

@@ -2 +2 @@
 [[TracGuideToc]]
 
+[[PageOutline]]
+
 Trac supports notification about ticket changes via email. 
 
@@ -9 +11 @@
 
 == Receiving Notification Mails ==
-When reporting a new ticket or adding a comment, enter a valid email address in the ''reporter'', ''assigned to/owner'' or ''cc'' field. Trac will automatically send you an email when changes are made to the ticket (depending on how notification is configured).
+When reporting a new ticket or adding a comment, enter a valid email address or your username in the ''reporter'', ''assigned to/owner'' or ''cc'' field. Trac will automatically send you an email when changes are made to the ticket (depending on how notification is configured).
 
 This is useful to keep up-to-date on an issue or enhancement request that interests you.
 
+=== How to use your username to receive notification mails ===
+
+To receive notification mails, you can either enter a full email address or your username. To get notified with a simple username or login, you need to specify a valid email address in the ''Preferences'' page. 
+
+Alternatively, a default domain name ('''`smtp_default_domain`''') can be set in the TracIni file (see [#ConfigurationOptions Configuration Options] below). In this case, the default domain will be appended to the username, which can be useful for an "Intranet" kind of installation.
+
 == Configuring SMTP Notification ==
 
+'''Important:''' For TracNotification to work correctly, the `[trac] base_url` option must be set in [wiki:TracIni trac.ini]. 
+
 === Configuration Options ===
-These are the available options for the ''[notification]'' section in trac.ini.
- * '''smtp_enabled''': Enable email notification.
- * '''smtp_server''': SMTP server used for notification messages.
- * '''smtp_user''': (''since 0.9'') User name for authentication SMTP account.
- * '''smtp_password''': (''since 0.9'') Password for authentication SMTP account.
- * '''smtp_from''': Email address to use for ''Sender''-headers in notification emails.
- * '''smtp_replyto''': Email address to use for ''Reply-To''-headers in notification emails.
- * '''smtp_default_domain''': (''since 0.10'') Append the specified domain to addresses that do not contain one. Fully qualified addresses are not modified. The default domain is appended to all username/login for which an email address cannot be found from the user settings.
- * '''smtp_always_cc''': List of email addresses to always send notifications to. ''Typically used to post ticket changes to a dedicated mailing list.''
- * '''smtp_always_bcc''': (''since 0.10'') List of email addresses to always send notifications to, but keeps addresses not visible from other recipients of the notification email 
- * '''always_notify_reporter''':  Always send notifications to any address in the reporter field.
- * '''always_notify_owner''': (''since 0.9'') Always send notifications to the address in the owner field.
- * '''always_notify_updater''': (''since 0.10'') Always send a notification to the updater of a ticket.
- * '''use_public_cc''': (''since 0.10'') Addresses in To: (owner, reporter) and Cc: lists are visible by all recipients (default is ''Bcc:'' - hidden copy).
- * '''use_short_addr''': (''since 0.10'') Enable delivery of notifications to addresses that do not contain a domain (i.e. do not end with ''@<domain.com>'').This option is useful for intranets, where the SMTP server can handle local addresses and map the username/login to a local mailbox. See also `smtp_default_domain`. Do not use this option with a public SMTP server. 
- * '''mime_encoding''': (''since 0.10'') E-mail notifications are always sent in 7-bit mode. This option allows to select the MIME encoding scheme. Supported values:
+These are the available options for the `[notification]` section in trac.ini.
+
+ * '''`smtp_enabled`''': Enable email notification.
+ * '''`smtp_from`''': Email address to use for ''Sender''-headers in notification emails.
+ * '''`smtp_from_name`''': Sender name to use for ''Sender''-headers in notification emails.
+ * '''`smtp_replyto`''': Email address to use for ''Reply-To''-headers in notification emails.
+ * '''`smtp_default_domain`''': (''since 0.10'') Append the specified domain to addresses that do not contain one. Fully qualified addresses are not modified. The default domain is appended to all username/login for which an email address cannot be found from the user settings.
+ * '''`smtp_always_cc`''': List of email addresses to always send notifications to. ''Typically used to post ticket changes to a dedicated mailing list.''
+ * '''`smtp_always_bcc`''': (''since 0.10'') List of email addresses to always send notifications to, but keeps addresses not visible from other recipients of the notification email 
+ * '''`smtp_subject_prefix`''': (''since 0.10.1'') Text that is inserted before the subject of the email. Set to "!__default!__" by default.
+ * '''`always_notify_reporter`''':  Always send notifications to any address in the reporter field (default: false).
+ * '''`always_notify_owner`''': (''since 0.9'') Always send notifications to the address in the owner field (default: false).
+ * '''`always_notify_updater`''': (''since 0.10'') Always send a notification to the updater of a ticket (default: true).
+ * '''`use_public_cc`''': (''since 0.10'') Addresses in To: (owner, reporter) and Cc: lists are visible by all recipients (default is ''Bcc:'' - hidden copy).
+ * '''`use_short_addr`''': (''since 0.10'') Enable delivery of notifications to addresses that do not contain a domain (i.e. do not end with ''@<domain.com>'').This option is useful for intranets, where the SMTP server can handle local addresses and map the username/login to a local mailbox. See also `smtp_default_domain`. Do not use this option with a public SMTP server. 
+ * '''`mime_encoding`''': (''since 0.10'') E-mail notifications are always sent in 7-bit mode. This option allows to select the MIME encoding scheme. Supported values:
    * `base64`: default value, works with any kind of content. May cause some issues with touchy anti-spam/anti-virus engines.
    * `qp` or `quoted-printable`: best for european languages (more compact than base64), not recommended for non-ASCII text (less compact than base64)
    * `none`: no encoding. Use with plain english only (ASCII). E-mails with non-ASCII chars won't be delivered. 
-
-Either '''smtp_from''' or '''smtp_replyto''' (or both) ''must'' be set, otherwise Trac refuses to send notification mails.
-
-=== Example Configuration ===
-
+ * '''`ticket_subject_template`''': (''since 0.11'') A [http://genshi.edgewall.org/wiki/Documentation/text-templates.html Genshi text template] snippet used to get the notification subject.
+
+Either '''`smtp_from`''' or '''`smtp_replyto`''' (or both) ''must'' be set, otherwise Trac refuses to send notification mails.
+
+The following options are specific to email delivery through SMTP.
+ * '''`smtp_server`''': SMTP server used for notification messages.
+ * '''`smtp_port`''': (''since 0.9'') Port used to contact the SMTP server.
+ * '''`smtp_user`''': (''since 0.9'') User name for authentication SMTP account.
+ * '''`smtp_password`''': (''since 0.9'') Password for authentication SMTP account.
+ * '''`use_tls`''': (''since 0.10'') Toggle to send notifications via a SMTP server using [http://en.wikipedia.org/wiki/Transport_Layer_Security TLS], such as GMail.
+
+
+=== Example Configuration (SMTP) ===
 {{{
 [notification]
@@ -49 +67 @@
 }}}
 
+
+=== Customizing the e-mail subject ===
+The e-mail subject can be customized with the `ticket_subject_template` option, which contains a [http://genshi.edgewall.org/wiki/Documentation/text-templates.html Genshi text template] snippet. The default value is:
+{{{
+$prefix #$ticket.id: $summary
+}}}
+The following variables are available in the template:
+
+ * `env`: The project environment (see [trac:source:/trunk/trac/env.py env.py]).
+ * `prefix`: The prefix defined in `smtp_subject_prefix`.
+ * `summary`: The ticket summary, with the old value if the summary was edited.
+ * `ticket`: The ticket model object (see [trac:source:/trunk/trac/ticket/model.py model.py]). Individual ticket fields can be addressed by appending the field name separated by a dot, e.g. `$ticket.milestone`.
+
+=== Customizing the e-mail content ===
+
+The notification e-mail content is generated based on `ticket_notify_email.txt` in `trac/ticket/templates`.  The default looks like this:
+
+{{{
+$ticket_body_hdr
+$ticket_props
+#choose ticket.new
+  #when True
+$ticket.description
+  #end
+  #otherwise
+    #if changes_body
+Changes (by $change.author):
+
+$changes_body
+    #end
+    #if changes_descr
+      #if not changes_body and not change.comment and change.author
+Description changed by $change.author:
+      #end
+$changes_descr
+--
+    #end
+    #if change.comment
+
+Comment${not changes_body and '(by %s)' % change.author or ''}:
+
+$change.comment
+    #end
+  #end
+#end
+
+-- 
+Ticket URL: <$ticket.link>
+$project.name <${project.url or abs_href()}>
+$project.descr
+}}}
 == Sample Email ==
 {{{
@@ -75 +144 @@
 }}}
 
+== Using GMail as the SMTP relay host ==
+
+Use the following configuration snippet
+{{{
+[notification]
+smtp_enabled = true
+use_tls = true
+mime_encoding = base64
+smtp_server = smtp.gmail.com
+smtp_port = 587
+smtp_user = user
+smtp_password = password
+}}}
+
+where ''user'' and ''password'' match an existing GMail account, ''i.e.'' the ones you use to log in on [http://gmail.com]
+
+Alternatively, you can use `smtp_port = 25`.[[br]]
+You should not use `smtp_port = 465`. It will not work and your ticket submission may deadlock. Port 465 is reserved for the SMTPS protocol, which is not supported by Trac. See [comment:ticket:7107:2 #7107] for details.
+ 
+== Filtering notifications for one's own changes ==
+In Gmail, use the filter:
+
+{{{
+from:(<smtp_from>) (("Reporter: <username>" -Changes) OR "Changes (by <username>)")
+}}}
+
+For Trac .10, use the filter:
+{{{
+from:(<smtp_from>) (("Reporter: <username>" -Changes -Comment) OR "Changes (by <username>)" OR "Comment (by <username>)")
+}}}
+
+to delete these notifications.
+
+In Thunderbird, there is no such solution if you use IMAP
+(see http://kb.mozillazine.org/Filters_(Thunderbird)#Filtering_the_message_body).
+
+The best you can do is to set "always_notify_updater" in conf/trac.ini to false.
+You will however still get an email if you comment a ticket that you own or have reported.
+
+You can also add this plugin:
+http://trac-hacks.org/wiki/NeverNotifyUpdaterPlugin
+
 == Troubleshooting ==
 
@@ -102 +213 @@
 }}}
 
-In such a case, you need to configure your server so that the web server is authorize to post to the SMTP server. The actual settings depend on your Linux distribution and current security policy. You may find help browsing the Trac MailingList archive.
+In such a case, you need to configure your server so that the web server is authorized to post to the SMTP server. The actual settings depend on your Linux distribution and current security policy. You may find help browsing the Trac [trac:MailingList MailingList] archive.
 
 Relevant ML threads:
  * SELinux: http://article.gmane.org/gmane.comp.version-control.subversion.trac.general/7518
- 
+
+For SELinux in Fedora 10:
+{{{
+$ setsebool -P httpd_can_sendmail 1
+}}}
 === ''Suspected spam'' error ===
 
@@ -113 +228 @@
 The default Trac configuration uses Base64 encoding to send emails to the recipients. The whole body of the email is encoded, which sometimes trigger ''false positive'' SPAM detection on sensitive email servers. In such an event, it is recommended to change the default encoding to "quoted-printable" using the `mime_encoding` option.
 
-Quoted printable enconding works better with languages that use one of the Latin charsets. For Asian charsets, it is recommended to stick with the Base64 encoding.
+Quoted printable encoding works better with languages that use one of the Latin charsets. For Asian charsets, it is recommended to stick with the Base64 encoding.
+
+=== ''501, 5.5.4 Invalid Address'' error ===
+
+On IIS 6.0 you could get a 
+{{{
+Failure sending notification on change to ticket #1: SMTPHeloError: (501, '5.5.4 Invalid Address')
+}}}
+in the trac log. Have a look [http://support.microsoft.com/kb/291828 here] for instructions on resolving it.
+
 
 ----